How to Learn Lock Picking Technique Well

People usually want to learn the lock pick skills when they are locked outside the car or door. While, it is not easy to learn lock picking technique in the beginning. You need know that each lock is totally different, you should learn the basic principles at first. And there is an easy way for people to pick a lock in daily life. You need scrub each lock more and more often. 

You Can Insert The Tension Wrench into the Key Hole At first

If you want to pick a lock easily, you had better carry the tension wrench all the time. Many people often ignore the importance of the tension wrench. The tension wrench is the thing that can lift the key pins to line up the shear line.

That’s why we need the tension wrench. When you lift the pin sets with your pick, you have to apply tension on the plug. As you are applying the right amount of torque on the plug, the drive pin passes the shear line, and the plug will be rotated slightly. And when you pull your pick out the lock, the key pin will drop back down again, then the drive pin will catch the edge of the plug. So, it leads to keep the shear line. You can keep lifting pins with you pick and offering pressure with the tension wrench, and the driver pins have cleared the shear line in the end. 

So, you can take your tension wrench and place it in the bottom of the key hole. Then, you need offer slight pressure in the direction you want to turn the key when you hold it. Meanwhile, you need pay attention to the amount of pressure. Too much pressure will cause the driver pins to bind below the shear line. You need control the amount of pressure and let the driver pins rise above the shear line, keep enough torque from avoiding its drop. When it begins to rotate, you can use an edge of the drive pin to catch the plug.

You Can Insert Pick at Top of Lock

If you want to pick a lock easily, you can choose the Bogota rake that has three ridges. This is the most effective lock picking tools that used to pick a lock easily.

You Can Scrub The Pick Back and Forth in the Key Hole

In the process of keeping offering the slight pressure on your tension wrench, you can scrub the inside of the plug with your pick. When you are going to pull the pick back, you can lift it up instantly in order to offer pressure on the pins.

You Can Repeat These Steps till all the Pin Set

You need keep offering torque on the tension wrench and scrubbing the pins till they all set. You can also offer more torque and pressure on the pins with your picks when you have the last one or two pins that need to set. If you have not achieved the goal, you may have offered too much torque with the wrench. Please relax and let the pins reset, then stat to pick again. Remember to relieve the pressure. You can successfully pick many locks and tumbler locks though the scrubbing method. 

In your daily life, you may come across different kinds of locks to pick. So, you will need a good Lock Pick Sets.You need remember that you can try to pick each pin set on at a time. Among these trickier locks, you can look for the pin stack that resists mostly in the process of picking and repeat the scrubbing method till all the pins are successfully picked.