Due to the complicated network of wires and switchboards involved in NBN lead-in cable installation, there’s often confusion.
Let’s take a closer look at the lead-in cable first. Don’t worry, SpinTel has everything you need to know about NBN lead-in cable installation – including the basics and frequently asked questions.
The lead-in cable is the link between your home or office and the carrier’s network, which will provide phone and internet services to your home. On the street side, the cable connects to the NBP, while on the other side is connected to the pit or pole in your street.
There are two ways to install the lead-in cable, depending on whether your street has pits and pipe infrastructure (underground) or an aerial network. This installation type depends on whether your street is an underground or an aerial network. Otherwise, the cable will be installed above ground (aerial) or under the electrical line on telegraph poles.
Installation of NBN lead-in cables
Most NBN lead-in cable installation takes place underground, within a trench, to ensure that your home or office is connected to Australia’s national broadband network (NBN).
In addition, most NBN lead-in cables are packed with a gel-like substance to keep moisture out of the cable. The underground installation provides maximum interference protection. Some Australian regions have hardened sheaths for these cables to withstand ant and rat bites.
A Step-by-Step Guide to Installing NBN Lead-In Cables
You may have a hard time keeping up with the overwhelming amount of information surrounding the installation of NBN lead-in cables. Even if you try, understanding a complex procedure involving wires, cables, and switchboards might take time, especially if you don’t have any prior experience. Since they are there to do the job for our peace of mind, you should leave the job to technicians or licensed telecommunications contractors.
For your property to be NBN-ready, however, there are a few basics to remember.
It is time to choose a plan that fits your needs and plans for NBN. If NBN is already available in your place, then it’s time to choose a plan that is suitable for your situation.
Preparing your house for NBN installation is the next step. Before the installation, you should coordinate with the installer about where the NBN equipment has to be installed. Here are some points to remember:
- You should be able to run fiber safely from the utility box without requiring special access
- A wall that is easily accessible or exterior
- Safely close to an electrical outlet
- In a safe place (not in an area where it can get damaged, such as a busy intersection)
- This should be done in a cool, dry, well-ventilated area (100 mm on all sides) and away from direct sunlight
- For troubleshooting, in a place that is easily accessible
- Placed in an area where ports can be accessed
You may also want to consider these situations prior to installing the NBN equipment in addition to checking where the equipment should be placed:
- The possibility of renovating your property so that you can relocate
- Extra cabling may be needed
- Limitations imposed by pre-existing telecommunications infrastructure
- Infrastructural factors that could determine where the NBN equipment will be located
- Location and distance of a possible wireless connection to the NBN equipment
As part of the installation of NBN lead-in cables, all equipment is mounted and installed, activated, tested, and cleaned up on the day of the installation. The technicalities at this stage are quite complex, so a licensed lead in cable technician should handle this entirely.
How are Lead-In Cables installed?
In this case, the NBN network provides the network to your home or business. By connecting your home to the network using a lead-in conduit, they will be able to provide the network to your home, but you will have to provide or excavate the trench or conduit to the PEP.
Your lead-in from PEP will then be connected to the pit again by the network. If you’d like to save time, you can also hire a certified contractor. Almost 40% of NBN users have a private cable installation, so it is not a big deal.
What is the best time to install Lead-In Cables?
An NBN lead-in cable installation service won’t be necessary unless your home already has one. It’s likely, however, that you’ll need a new lead-in cable if you’re upgrading your internet, cable, or phone service. This is especially true if you’ve gone through any of these:
- There has never been a cable internet connection or a home phone connection in your home or property.
- Renovations were performed on your property.
- There was a demolition and rebuilding of your home or property.
- Your home or property has been transferred.
Generally, lead-in cables need to be installed by an expert. This is the first and most important thing you need to know.in cable installation. It has to be done
Generally, lead-in cables need to be installed by an expert. This is the first and most important thing you need to know.pinTel delivers only the most suitable NBN plan for you, your family, and your business.
The most important thing to know about lead-in cable installation is that you must hire an expert.