How To Select The Right Gas Detection System?
Gas Detection have been in the play for quite a long time, and we have witnessed a few modifications recently. The market is flooded with gas detectors and sensors, and an amateur can easily be overwhelmed with them. Many businesses and individuals end up making the wrong selection of a gas detector or detection system. What goes into the process is paying closer attention to the product in the subject and its functionality. Selecting the right gas detection system would require you to pay attention to a few details discussed in this post. Keep reading to know more!
Important considerations for selecting the right gas detection system:
The market is flooded with various gas detection products. Choosing the right one could be daunting unless you possess substantial knowledge. An inspection of specifications will reveal the minor differences among what we consider the same products. Following are a few important considerations you need to consider for selecting the right gas detector or monitoring system.
1. Know your site risks:
Before you begin searching for the right equipment or system, isn’t it wise to assess your worksite for prevailing risks? What potential risks and hazards does your workplace is exposed to? Any business or industry should conduct risk assessment activities to know their site risks. Once done, selecting the appropriate device could be easier.
Common risks or hazards include Oxygen deficiency, potential gas hazards, and explosion risks. You should use the right gas detection system as a risk reduction method to identify your worksite’s potential risks and hazards.
2. Monitor the prevailing gases:
Once you are done with the risk assessment and know there are gases present in your atmosphere, what specific gases are there? Are they toxic and harmful for your employees? If yes, the detector or monitoring system you choose should be able to detect these gases. As an owner, you should ask yourself or your team the following questions.
- How many toxic gases/chemicals are we exposed to?
- What are atmospheric hazards present at the worksite?
- Are there any other gases that could lead to cross-interference?
Not all gas detectors can detect various gases simultaneously, but a few can help your cause. You should better look for a detector or system that can monitor the gases you are most likely to encounter in your workplace. If the device you chose is not detecting them properly, your investment was for nothing.
3. Measure the gases ranges:
Various toxic gases have different exposure levels, which should not exceed the limit. If they do, the workers are at risk, and preventive measures become necessary. If you think the hazardous gases present in your atmosphere are too little in concentration, there is no need to install detectors. However, if they seem to cause a disturbance, you better opt for monitoring systems.
Ammonia is said to be toxic to human health when it crosses 300 ppm. If it is below this range, there is no need for the detector. However, if you think the concentration is too high and your PPE is not working, it is time to install effective gas detectors.
4. Ask the right questions:
It would be best to ask a few questions before investing in a monitoring system with primary safety concerns in mind. Since installing a security system against toxic gases takes time and resources, the decision should better be made after due diligence. You can ask several relevant questions before you buy anything. These questions fall into the following categories.
i) Which gases are to be detected?
ii) Where are these gases coming from?
iii) What are the environmental conditions of the detection site?
iv) Is it feasible to use a monitoring system in a particular place?
5. Understand product functionality:
As discussed, a closer and detailed inspection of various gas detectors will uncover different functionalities among gas detectors. We might consider all the same, but they are not, and you need to understand their functionality. How can you choose a product or system if you don’t know how it works? The configuration systems differ a lot, and you need to know them.
An effective device caters to your need and detects the gases you are exposed to. It will only come possible if you know the product’s functions and configurations. It would be best to opt for an effective detection system that contains the function of detecting the gases you are exposed to.
Make your industry hazard-free with gas detectors!
Industries of all kinds are exposed to various hazardous gases. If not detected on time, they cause considerable damage. If you want to make your industry hazard-free, you need to install effective gas detectors and monitoring systems in your industry. Connect with safety equipment suppliers today and place your order!
